Trade & Industrial

Stainless Steel Light Fabricator - Immediate Start, but we are always looking for your skill set.

If you can Fabricate and make your work sparkle “WE WANT YOU”!

We are looking for 2 experienced Stainless Steel light Fabricator that can produce Stainless Steel components, and make them shine. This is a long term project that may become permanent for the right people. You will be a competent with using both Mig and Tig welders working to a quality finish.

Stainless Steel Fabricator.

The position been offered is long term contracts roles that may lead into a permanent position.

You will Ideally have or most of the following::

Trade Qualified as Light Fabricator or equivalent;
Experience in fabrication of high end Stainless Steel components;
Experience in polishing and finishing of Stainless Steel fabricated work;
Competent in both MIg and Tig welding procedures;
Competent in operation of general workshop equipment;
Can work unsupervised, also in a team environment;
Are punctual and reliable at all times;
Able to meet dead lines;
References will be required.
Salary will be based on experience.

For an interview with Mike or Anne email your CV to anne.smith@jobsmith.co.nz to arrange a face to face interview.

Fleet Service Technician - Diesel Mechanic or Automotive Technician

Interviewing May 2012

Seeking change, relocation or made redundant?
Apply now for immediate consideration and confidential interview.

This position is responsible for performing routine maintenance and a variety of repairs on Fleet vehicles, crucial to the SAFE operation of the fleet.

You will:-

Have the recognised Trade qualifications;
Have a proven work history in diesel mechanics or Fitter, though not essential;
Enjoy big boys toys;
Have some experience and knowledge of hydraulics;
Be available for working on-call (one in four);
Be based within the Wellington region or can relocate;
Hold F, R, T or W endorsements or be willing to get appropriate ‘endorsements’ if required.

This is a ‘Drug Free Workplace’ therefore a pre-employment Health and Drug Test will be carried out prior to being offered employment.

Great package for the right person.

All applications dealt with in a confidential manner.

If this role isn't exactly you, but you want more information, also forward your application. We will be in Touch!

Email your cv to anne.smith@jobsmith.co.nz or phone (04) 499 5119 or 021 045 0074

SERVICE TECHNICIAN - Ongoing requirement

An opportunity has arisen for the position of a Service Technician with the right attitude and skills to join our friendly team. Our workshop is Wellington based and specialises in the supply and service of forklifts however the position will include work on a great variation of materials handling equipment.

We are seeking an experienced Forklift Service Technician who enjoys the independence of being out on the road.

A company vehicle will be supplied as a lot of time will be spent outside of the workshop as a mobile technician.

A person who has a positive outlook and the communication skills required to develop new business opportunities and maintain existing customer relationships will be successful in this position.
Rostered call outs with overtime is part of our business, we would prefer someone able to work Saturdays.

This is a great opportunity for an outgoing, motivated person to take the next step in their career. The applicant must be able to work unsupervised, have an excellent attitude and strong customer focus.

email your cv now to cv@jobsmith.co.nz or phone us on (04) 499 5119 for a confidential chat.

Mechanical Fitter - Immediate Start - Ongoing requirement

Come - Join their team in a modern and well equipped manufacturing facility.

You would:-

Be Trade qualified
Have pipefitting skills;
Electrical knowledge an advantage;
Have a high standard of workmanship taking pride every step of the way;
Work well within a dedicated team;
Ensure all installations and tasks are carried out safely and comply with company policies and procedures;
Be responsible for the mechanical safety of all equipment owned and operated on site;

Send your cv to anne.smith@jobsmith.co.nz to arrange interview.

CNC Brake Press Operator - Immediate Start

Our client is a progressive company that runs a manufacturing engineering workshop producing components both for local and overseas markets. They have made significant invested into their workshop tooling to ensure they are at the for front of technology with in their field.

Responsibilities will include:

• To produce quality pressing i.e., cones segments, squares to round etc
• Understanding machine set ups and tool changes
• Quality/ quantity/dimensional tolerances checks
• Meeting the scheduled times to ensure customer satisfaction
• To work overtime when/if required

It is essential that you have the following criteria:

• Competency in CNC brake press operation
• Ability to read work shop drawings
• Be a highly organized/motivated
• Minimum of 2 years experience in a similar role
• Fork lift License would be advantageous but not essential

For further details email your cv to JOBsmith at anne.smith@jobsmith.co.nz

Engineering All-rounders

We have an ongoing requirement for competent Mechanical fitters/welders/fabricators.

You will ideally have recognised Engineering or Mechanical qualifications.

Trouble shooting, fault diagnosis,
Plant and Equipment overhauls
Bearing fitting and plant maintenance
Good light/heavy fabrication skills including plate development/layout
Good machining skills
Competent in operating workshop equipment eg, press/rolls/guillotine etc
Can work unsupervised
Can work well within a team environment.
Adequate computer skills are essential.
Are punctual and reliable at all times.
Have your own tools
References from previous employers
Pre-employment drug testing may apply to some positions

For further details email your cv to anne.smith@jobsmith.co.nz

Industrial Electricians - We are always looking

If you're an Electrician (with an industrial bias) and enjoy outdoor works, enjoys working lots of hours, then you might want to consider this Electrical opportunity.
On the job
You will be provided with excellent on the job training to help you progress and supported by a focused management team with vast industry experience who are driven to achieve sustainable growth and development and who have proven expertise within infrastructure work.

• Electrical Registration or Heavy Electrical b/grd (meaning Nat. Cert or Trade Cert)? (essential)
• Do you have a love of the great outdoors and all weather conditions? (essential)
• Do you enjoy shift work and lots of hours (essential)?
• Are you looking for a job with great career progression? (desired)
• Do you enjoy working as part of a team? (essential)
• Do you demonstrate a commitment to health and safety in the workplace? (essential)
• A current driver’s licence (HT and/or forklift desirable).
• Have a strong mechanical aptitude (essential)?
• To be able to work outdoor in all weather. (essential)
• A desire to learn and attain further qualifications. (preferred)
• And do you have a very good level of physical fitness? (essential)
• Willingness and ability to work at heights are also important.

IF you’ve being thinking about making a change in your life, looking for above average $$, receiving more training?

Then perhaps you should phone us to organise an interview, NOW as delaying could see you miss out entirely in these great opportunities.

Send your cv and covering letter to anne.smith@jobsmith.co.nz

HVAC Service Technician/Electrician - Start ASAP

Fantastic Team Feel, Continue to Build Relationships, Be Challenged & Have Fun at the Same Time

We request the services of a HVAC Technician and/or Registered Electrician to compliment our clients existing team.

Our clients focus is on continuous improvement and exceeding their customers’ needs. If you are on the same wave length then it’s worth touching base with me to discuss this opportunity.

Hours of work will follow a 7.30am – 5.00pm Monday to Friday pattern, though some overtime is offered and being available on-call (rostered) will enhance everyone’s lifestyle.

During these hours your day will:-

· Be out and about, focusing mainly within commercial building services;

· Preventative and corrective maintenance of mechanical equipment;

· Electrical installation work;

· Maintaining strong service relationships/satisfaction with clients;

· Related administration;

· and of course having a great time doing it.

With individual building assignments, you will be able to take responsibility for your own work and be proud of your achievements.

To be successful in this role, the following qualities are desirable:

· Relevant trade qualifications (Electrical Trade Cert) experience in BMS/HVAC;

· Intermediate to advanced computer skills;

· Focus on meeting commitments;

· Strong technical problem solving.

A competitive wage, company vehicle, cell phone and uniform will be provided to the successful applicant.

Diesel Mechanic - Ongoing requirements Send us your cv by email to :- anne.smith@jobsmith.co.nz

Are you a Mechanic who holds an F, R,T or W endorsement?
Do you like a full range of toys and we’re not talking ‘Plastic Fantastic’ here?

Regarded as one of the best places to work. They provide on-going support and backup for their staff.

You will:-
* Have a proven work history in diesel mechanics
* Perhaps some exposure to agricultural farm machinery
* Have Electrical experience would be a plus but not imperative
* Have no problems working on-call (one in four)
* Pass drug and alcohol and medical test
* Be qualified to Trade level as minimum requirement or your about to complete your apprenticeship
* Be willing to get appropriate ‘endorsements’ if required

Great package for the right person.
All applications dealt with in a confidential manner
You must be a New Zealand resident to apply for this role, or have a valid work permit (min 2yrs).
For more details please email your cv with a cover letter to anne.smith@jobsmith.co.nz You must be eligible to work in NZ to apply for this role.